Home » You searched for Teensy
Showing all 61 results
Adds 10 additional I/O pins to Teensy 4.0
For compact Teensy 4.0 and 4.1 audio projects
Down revision board documentation
Bottom extended reach Ethernet header for AgOpenGPS Baseboards
Low cost 16-bit stereo audio
Select Kit or Assembled
Add addressable LEDs to your Teensy project
General purpose adapter for Prototyping System for Teensy 4.1 baseboard.
Platform for working with the powerful Teensy 4.1
Bottom mounted I/O for most PCB baseboards.
Flash memory adds 2G-bit non-volatile memory to Teensy 4.1
For use with the Teensy Audio Adapters
Flash memory adds 1G-bit non-volatile memory to Teensy 4.1
32-bit 180MHz ARM Cortex-M4 processor with floating point unit.
Select Pins Loose or Pins Soldered
Flash memory is used to add 512M-bit non-volatile memory to Teensy 4.1
Microchip 23LC1024 SRAM for adding delay line functionality to Teensy Audio adapters
Includes 8MB PSRAM & 16MB / 128MB / 256MB Flash or 16MB PSRAM
Flash memory for additional non-volatile storage on Teensy 4.1 and Audio Adapters
Add 16-bit 44.1kHz sample rate (CD quality) audio to Teensy 4.x projects.
Select No Pins or with Pins and Mic
Add16-bit 44.1kHz sample rate (CD quality) audio to Teensy 3.x projects.
Compact, low cost 32-bit 48MHz ARM Cortex-M0+ processor
QSPI PSRAM adds 64M-bit additional volatile memory to Teensy 4.1
Connects Ethernet cable to Teensy 4.1
32-bit 72MHz ARM Cortex-M4 processor. 5V tolerant
32-bit 120MHz ARM Cortex-M4 processor with FPU. 5V tolerant
Worlds fastest Arduino compatible 600MHz microcontroller
Select Pins Loose or Soldered or Lockable
600MHz Arduino compatible microcontroller
Select Pins Loose or Soldered with Ethernet or NE (No Ethernet) or Lockable
For use with Prototyping System for Teensy 4.1 baseboard.
Model MP3-TF-16P / FN-M16P
Full color round display with wide viewing angle.
For Prototyping System for Teensy 4.1
White, IP30 Non-Waterproof, 5V Operation
Provides interface between bus controller and physical CAN bus
For use with Prototyping System for Teensy 4.1
Uses ILI9341 display and XPT2046 touch SPI controllers
For wired Ethernet connections for Teensy 4.1 and similar applications
For bringing Teensy 4.1 Ethernet out from bottom of the module
For overclocking your Teensy 4.x
Continuously variable position sensor
Supports common cathode LED modules over SPI bus
Proto module with flexible 3.3 and 5V power distribution.
Supports 3, 4 and 5-digit common cathode LED modules
Allows MCU to easily establish a wired Ethernet connection to a network.
Provides interface between bus controller and the physical CAN bus
Nice and long highly flexible USB 2.0 extension cable
Complete set of M/F low profile quality breakaway headers for 28-pin MCUs
Complete set of M/F low profile quality breakaway headers for 48-pin MCUs
Thumbwheel potentiometers work with the Teensy Audio Adapters.
Useful for socketing 48-pin MCUs like the Teensy 4.1
Useful for socketing 28-pin Teensy MCUs and Teensy Audio modules
Nice long USB Micro-B cable is flexible with 24/28 AWG wires
This 5′ long Micro-B cable includes both data lines and a built-in power switch.
For stacking boards like Teensy Audio Adapter by permanently soldering.
Full color display with wide viewing angle. This is version without CS pin.
Accommodates any DIP style MCU module with flexible options for input power and distribution.
Select Board Only or Board With Kit
USB Micro-B cable is flexible with 24/28 AWG wires
Straight tweezers with blunt nose for handing medium to larger parts.