This panel mount extension cable is perfect when embedding a Teeny, ESP32 or other boards with a Micro-B USB in an enclosure.
- USB 2.0 Micro-B Female Panel Mount Extension Cable, 1-Ft
KEY FEATURES OF USB 2.0 MICRO-B PANEL MOUNT EXTENSION CABLE, 1FT:
- 24 AWG power, 28 AWG signal conductors
- Black cable is fully shielded
- 1 foot total length
- Meets USB 2.0 specification
These cables are often used when mounting a board with the USB Micro-B connector into an enclosure. That allows the board to be mounted where convenient instead of needing to position the board against the wall of the enclosure or having to open the enclosure to access the USB port for downloading or using the serial output of the board.
The female panel mount end has M3 nuts embedded in the ears on 17mm centers using M3 screws which are included.
The panel mount end fits through a slot that is 9mm x 4.5mm, but can also work through a round hole that is 9mm or 3/8″.
The microcontroller end requires about 2″ of space to make the bend
|Cable Length||.3m (1 ft)|
|Terminations||A||USB Micro-B (Female) – Panel Mount|
|B||USB Micro-B (Male)|