Home » Shop » Communications & Interfacing
Showing all 32 results
Low cost and easy to use GPS module
Adapter for ESP-01 WiFi module includes logic level shifting.
Provides WiFi connectivity for a microcontroller.
Allows MCU to easily establish a wired Ethernet connection to a network.
Allows Uno or Mega to establish a wired Ethernet connection to a network.
Provides a bridge to connect between TTL serial devices and a USB port.
Master/Slave serial data to Bluetooth bridge module
Provides interface between 5V and 3.3V devices using the I2C bus.
VS1838 based receiver detects infrared (IR) for remote control.
Kit includes remote control with battery, IR sensor and IR transmitter LED.
RF Wireless Module has a range up to 100 meters and up to 2Mbps data rate.
nRF24L01 with power amplifier and antenna for extended range.
Breakout adapter includes a built-in 3.3V regulator and easy header hookup.
4-channel bi-directional logic level converter.
8-channel bi-directional logic level converter.
Converts between TTL serial and +/- RS-232 levels using built-in charge pumps.
RS-485 differential signaling for robust long distance communications.
Implements the CAN 2.0B protocol for robust distributed node communication networks.
Provides interface between bus controller and the physical CAN bus
Provides interface between bus controller and physical CAN bus
Wireless technology commonly embedded into key cards..
Module can be used to expand the digital I/O of an MCU using the I2C bus.
Robust automatic bi-directional interface between TTL and RS-485
Connect up to 8 I2C devices or 8 separate I2C buses.
Interface between a CAN bus controller and the physical differential lines.
Converts SPI bus Up or Down using SN74LVC2T245 buffers
Select Pins Loose or Pins Soldered
Converts a 16×2 or 20×4 character LCD display to I2C interface
Connects Ethernet cable to Teensy 4.1
Select Kit or Assembled
Adapter accepts a Micro-B style USB cable and converts to male header
Plugs into USB Type A port like found on PC or USB hub and converts to male header.
Adapter accepts a printer style Type B USB cable and adapts it to male header