This is a USB Type A Male to 2.54mm (0.1″) header breakout adapter that can plug into a USB port like is found on a PC or USB hub.
- USB Type A Male to 2.54mm Header Adapter
- 1 x 4 male header
KEY FEATURES OF USB TYPE A MALE TO 2.54MM HEADER ADAPTER:
This connector is the same as you would find on a USB cable and can be used to breakout power or the USB data lines directly off a USB port. It is not the connector that a USB cable can be plugged into.
These adapters ship with a strip of male header pins that can be soldered on. The header can be soldered on the bottom of the adapter if you want to plug this into a breadboard. If the header is soldered to the top of the adapter, female jumpers can be used to attach to the adapter. Wires can also be soldered directly to the board if the header is not used.
These can be useful for making USB breakout cables and similar applications. The board has two M3 size holes for mounting if desired.
The adapter brings out the 4 USB pins as listed below. There are also 2 breakout pads that connect to the connector shell.
1 x 4 Header
- GND = Ground
- D+ = Data + (USB differential data line +)
- D- = Data – (USB differential data line – )
- VBUS = USB Power (4.75 – 5.25V)
|Connector Type||USB Type A Male|
|Termination Style||1 x 4 header|
|Dimensions||L x W (PCB)||15 x 15mm (0.6 x 0.6″)|
|Length with connector||31mm (1.2″)|
|Country of Origin||China|