PCB, SOIC/TSSOP-14 to DIP Adapter HASL (5-Pack)

Description

These adapters have a HASL finish and can mount a 14-pin SOIC-14 IC on one side or a TSSOP-14 IC on the other side and convert it to a 0.5″ wide DIP-14 footprint.

PACKAGE INCLUDES:

• Qty 5 – PCB, SOIC/TSSOP-14 to DIP Adapter, HASL

KEY FEATURES OF PCB, SOIC/TSSOP-14 TO DIP ADAPTER HASL:

• Mounts SOIC-14, TSSOP-14 and similar package types
• Leaded HASL (Hot Air Solder Leveling) finish
• Trace width 0.010″ with 0.020″ width on corner pins
• 1.6mm / 0.62″ FR-4 construction

These adapter boards can mount 14-pin SMD components that either have a 0.65mm or a 1.27mm lead spacing and convert it to a 14-pin 0.5″ DIP footprint with pins on standard 2.54mm (0.1″)centers for use with breadboards and perf boards.  It is designed for SOIC-14 and TSSOP-14 packages, but it may fit other packages such as SSOP that share the same lead pitch.  Refer to the pad dimensions to determine suitability for mounting a particular package type.

You can also mount packages with fewer than 14 pins on the adapter, but keep in mind that the pinout will not be 1:1.

The board is double-sided to support the two different SMD pin pitches.  The header pins can be soldered to either side of the board for use with breadboards and they can be inserted into two single-row sockets if desired, such as on a perf board.

The DIP footprint is 0.5″ centers.  These boards can be used with standard straight male headers available separately or they can be ordered with high quality round machine pin headers that work especially well for inserting into sockets and can be used with the high quality round machine pin female sockets that come on break-away strips.

Board Finish

The boards are constructed of 1.6mm FR-4 with 1oz copper and green solder mask.  A 0.010″ trace width is used with heavier duty 0.020″ traces on the corner pins which normally carry power and ground connections.

The copper has a leaded HASL (Hot Air Solder Leveling) finish for lower cost and good performance with standard leaded solder.

Notes: 

1. None

Technical Specifications