These tactile momentary pushbutton switches come with a black snap-on cap and have a good snap action feel and audible click and are breadboard friendly.
- Qty 5 – Tactile Momentary Pushbutton with Black Cap 12mm
KEY FEATURES OF TACTILE MOMENTARY PUSHBUTTON BLACK 12mm:
- NO (Normally Open) contacts
- Good snap action feel with audible click
- Black cap
- Breadboard friendly
These switches are 4-terminal normally open pushbuttons. Pins are formed solder type on 5.08mm (0.2″) centers on one side x 12.7mm (0.5″) and are breadboard friendly.
The switch body is a standard 12 x 12 x 7.3mm square version. The button cap increases the height to 12mm. This cap is snap-on and can be replaced if desired.
The contact closure is across the pins on the same side of the switch body as shown in the example image to the right.
Our Evaluation Results:
These switches have a great snap-action feel with audible click. The 4-pin layout works well in solderless breadboards or perf boards with a 0.1″ standard spacing.
These are designed for basic logic level switching but we tested them with 12V @ 1A and 32V @100mA without drama and the contact resistance was still < 0.01Ω after the testing.
|Switch Type||Miniature Momentary Pushbutton|
|Contact Style||OFF-ON (Normally Open)|
|Maximum Current||Tested to 1A|
|Maximum Voltage||Tested to 32VDC|
|Termination Style||Solder pins|
|Dimensions||L x W x H (switch body w/ cap)||12 x 12 x 12mm (0.47 x 0.47 x 0.47″)|
|Lead Spacing||5.08 x 12.7mm (0.2 x 0.5″)|