The SG90 / MG90 Servo Bracket is an acrylic bracket designed to mount the SG90 and MG90 servo motors.
- SG90 / MG90 Servo Bracket
- 2 smaller M2 x 10mm screws & nuts for mounting the servo motor to the bracket
- 2 larger M3 x 10mm screws & nuts for attaching the bracket to a surface.
The bracket is flat and is commonly used for mounting a servo motor for steering a small robotic car or it can be used to rotate a sensor such as an ultrasonic range finder.
For mounting, the bracket has two small holes that allow the servo to be mounted from the top or bottom and then screwed in place using the screws provided. The bracket also has a slot with two screws and nuts for mounting it to a surface.
Note that the kit does not include the servo motor, but they can be ordered down below if needed.
BEFORE THEY ARE SHIPPED, THESE BRACKETS ARE:
|Dimensions||W x L||35mm x 37mm (1.38 x 1.46″)|
|Servo mounting hole W x L||13 x 24mm (0.51 x 0.95″)|