These 3-position medium duty screw terminals fits standard 0.2″ hole spacing for connecting wires to a PCB.
- Qty 5 – Screw Terminal 5.08mm 3-Position
KEY FEATURES OF SCREW TERMINAL 5.08MM 3-POSITION:
- Compact size
- Accept up to 16 gauge wire
- Stack end-to-end
These are medium duty 3-position screw terminals that can accept up to a maximum of 16 AWG wire, but are best suited for use with 18 AWG or smaller wire.
These are typically used with PCB prototype boards and work well for low to medium power connections such as connecting to wiring for smaller DC motors as used on robotic vehicles or connecting to power supplies. They can also be used for connecting to sensor wiring.
The solder pins are 0.025″ in width, so will fit any standard perf or solder breadboard.
The housings have a tongue and groove on the sides which allow them to be stacked end-to-end to create longer terminal strips. The terminals are stacked by sliding the tongue and groove together and so should be stacked before soldering them to the PCB. The 3-position and 2-position terminal strips can be mixed together to form any length of terminal strip needed.
Notes: The color of blue can vary from the pictures.
|Terminals||#||3 per strip|
|Wire Range||26 – 16AWG|
|Mounting||Thru-hole solder pins|
|Dimensions||L x W x H||15 x 8 x 10mm (0.59 x 0.32 x 0.39″ )|
|Pin Pitch||5.08mm (0.2″)|
|Pin Width||.635mm (0.025″)|
|Pin Length||4mm (o.16″)|
|Country of Origin||China|