These miniature tactile NO (Normally Open) pushbutton switches have a good snap action feel and long leads perfect for breadboard use.
- Qty 10 – Miniature Momentary Pushbutton (Normally Open) – 10mm leads
KEY FEATURES OF MINIATURE MOMENTARY PUSHBUTTON – 10MM LEADS:
- NO (Normally Open) contacts
- Good snap action feel
- Extra long 10mm 2-terminal leads perfect for breadboard use
They are 2-terminal Normally-Open type of pushbutton. Pins are extra long 10mm solder type on 5.08mm (0.2″) centers and work well in solderless breadboards.
Our Evaluation Results:
These switches have a good snap-action feel.
These are designed for basic logic level switching and should be used for that purpose. We did test them to 15V @ 100mA without drama and the contact resistance was still < 0.01Ω after 100 test cycles.
The extra long leads will bottom out in most solderless breadboards. You may want to trim the leads slightly to allow the pushbutton to sit flush to the breadboard surface.
|Miniature Momentary Pushbutton
|OFF-ON (Normally Open)
|Tested to 100mA
|Tested to 15VDC
|10mm Solder pins (x2)
|L x W x H (switch body)
|6 x 6 x 5mm (0.24 x 0.24 x 0.2″)