These are 1×18 single row female headers for mating with standard male header pins
- Qty 2 – Header Female 1×18
KEY FEATURES OF HEADER FEMALE 1X18:
- 1×18 Female header with standard 2.54mm (0.1″) spacing
The pins are designed to be soldered to a PCB. The female side mates with standard length male headers that are approximately 6mm long.
When soldering these connectors onto a board, it is sometimes easiest if you insert the connectors into male headers stuck into a solderless breadboard or similar in order to hold the connectors aligned during the soldering process.
- This length header may be cut from larger headers, so one end may be a slightly rough cut but the pin will be fully encased.
- These strips can be cut into shorter lengths if needed using diagonal cutters, but at least one pin will be lost in the process.
|Pins||1 x 18 per strip|
|Pin Pitch||2.54mm (0.1″)|
|Pin Type||Female header receptacle|
|Mounting||PCB thru-hole pins|
|Dimensions||Connector Length||46.5mm (1.83″)|
|Connector Body Height||8mm (0.32″)|
|Pin Length||3mm (0.12″)|