These panel mounted DC power jacks fit standard DC power plugs for adding a DC power input jack to an enclosure.
- Qty 2 – DC Power Jack Panel Mount w/ nuts
KEY FEATURES OF DC POWER JACK PANEL MOUNT:
- Panel mounted in 15/32″ hole in panels up to 0.312″ thick
- Fit standard 2.1/5.5mm male plugs
- Solder connections with plug detect pin
These DC power jacks are designed to be mounted into panels up to 0.312″ thick. They use a mounting hole of about 15/32″ and come with the nut to attach the jack to a panel.
There are 3 solder connections on the back of the jack. Two are for the positive and negative (Ground) connections. The third connection is a plug detect output. When no plug is inserted, the pin is shorted to the ground connection. When a plug is inserted, the pin is open circuit. This can be useful for some applications, but is typically not used.
|Connector Type||DC Power Jack standard 2.1mm|
|Mounting Hole||12mm (15/32″)|
|Dimensions||L x Outside Diameter||18 x 14mm (0.71 x 0.55″ )|