The Battery Holder 6 x AA with Right Angle DC Plug holds six AA batteries and provides approximately 9VDC for powering a robotic vehicle or other mobile project.
- Battery Holder 6 x AA with DC Plug
- Batteries are not included
KEY FEATURES OF BATTERY HOLDER 6 X AA WITH DC PLUG:
- Holds six AA batteries
- 9V Output
- Standard 2.1mm DC power plug
- 6″ cable length
- 24AWG wire gauge
- Heavy duty construction
These are a handy way to supply power to a robotic assembly or to provide mobile power for a project such as if you want to pack an Arduino or solderless breadboard around to test wireless communications. The batteries are connected in series, so 6 AA batteries provides around 9V depending on the type of battery that they are.
The holder has a 6″ 24AWG cable that ends in a right angle 5.5mm(OD) x 2.1mm (ID) DC power plug which can be plugged directly into an Arduino or other power jack without sticking out as much as a straight connector will.
We also sell a standard 9V battery adapter which works well for low current applications, but this 6 x AA setup provides considerably more power capability and is suitable for driving smaller DC motors such as those found on many robotic vehicle platforms.
There are two reinforced holes for mounting the assembly or double-sided tape or Velcro can be used.
- Batteries not included
|Cable Length||15cm (6″)|
|Dimensions||L x W x H||90 x 57 x 16mm (3.54 x 2.2 x 0.6″)|
|DC Power Plug||Right Angle 5.5mm OD x 2.1mm ID|