These 5015 blower fans are a low cost solution for spot cooling heat sinks, 3D print heads and similar applications.
- 5015 Blower Fan, 12V
KEY FEATURES OF 5015 BLOWER FAN 12V:
- Power: 12VDC
- Current: 150mA
- Bearing Type: Sleeve
- Airflow: 5.9CFM (rated)
- Leads: 10″ 2-wire terminated with XH2.54-2P connector
- Noise: 30dBA (rated)
OUR EVALUATION RESULTS:
These fans put out a moderate amount of air and are commonly used for cooling print heads of 3D printer or similar spot cooling applications where you need a directed stream of air.
The fans are fairly quiet and fine for most applications.
The fan will operate over the range of 6-12VDC with reduced airflow and noise at lower voltages. Most that we have tested have responded to PWM pretty well, but some may start to sing at certain PWM values.
|H x L x W||50 x 50 x 15mm (2 x 2 x 0.59″)|
|Wire length||250mm (10″)|