Mini Platform Acrylic Base

Description

This acrylic base is for use with the Mini Platform for Teensy 4.1.  The Mini Platform can simply be used with the standoffs that it ships with utilized as feet or the standoffs can be attached to this acrylic base for a more finished look and a little more protection for the bottom side.

PACKAGE INCLUDES:

• Matte Black Acrylic Panel, 5.55″ x 3.2″ x 3mm thick
• Qty 6 – M3 x 8mm Black Nylon Screws

There are two versions of the acrylic base available.  This shorter one shown here fits the basic Mini Platform baseboard.  The other Extended Acrylic Base is longer and fits both the Mini Platform baseboard as well as adapter modules such as the Mini Platform Solderless Breadboard Adapter and the Mini Platform Audio Tutorial Adapter.

ASSEMBLING THE MINI PLATFORM ACRYLIC BASE

Remove the Protective Paper

The protective paper is simply peeled off.  Once the protective paper is removed, you will see that one side of the acrylic is matte black while the other side is shiny black.  The black matte side faces up.  The acrylic base is symmetrical, so can be used in either orientation.  You can even put the shiny side up if you prefer.

Mount the Mini Platform Board.

The Mini Platform baseboard comes with M3 x 8mm black nylon standoffs already installed.  The 6 M3 screws that come in the kit are inserted from the bottom of the acrylic base and screw into the 6 standoffs.  If the screws/standoffs do not line up on some holes, you can temporarily loosen the screws mounting the standoffs to the Mini Platform baseboard.  Once both top and bottom screws are both started, they can both be tightened.

The nylon screw heads serve as the feet, but you can also install rubber adhesive feet if you prefer.

Notes:  

1. None

Technical Specifications