Home » You searched for 24 pin header » Page 2
Showing 101–200 of 309 results
Add addressable LEDs to your Teensy project
Linear potentiometers can be panel or PCB mounted.
General purpose adapter for the Prototyping and Project System for Teensy 4.1 baseboards.
Increases cooling when overclocking your Teensy 4.x
High torque 50RPM continuous rotation servo for medium duty applications
High torque, moderate speed 180 degree servo for medium duty applications
Flash memory adds 2G-bit non-volatile memory to Teensy 4.1
Flash memory adds 1G-bit non-volatile memory to Teensy 4.1
Continuously variable position sensor
Small adapter for space constrained applications
Supports common cathode LED modules over SPI bus
Proto module with flexible 3.3 and 5V power distribution.
Supports 3, 4 and 5-digit common cathode LED modules
Allows MCU to easily establish a wired Ethernet connection to a network.
Provides three independent ON/OFF slide switches in a small package
Fixed linear regulator that can output 6V @ 1.5A
Very accurate RTC with battery backup, 4k x 8-bit EEPROM and I2C.
5.2 – 40V input to 3.3V output
Extra large photosensor for detecting the presence and relative strength of light.
Provides 16 GPIO using I2C bus at up to 1.7MHz
Micro size servo is perfect for driving micro-robot drive wheels.
Provides a 16 GPIO using I2C bus at up to 1.7MHz.
OUT OF STOCK
Simple tester for servo motors or ECS
5V logic compatible SSR controls 100-240VAC@2A
5V relay can control AC or up to 24VDC at up to 90W.
Easy to use proximity sensor with 3-80cm detection distance
5V logic compatible, controls 100-240VAC@2A
3.3 – 5V logic compatible, controls 100-240VAC@2A
Mounts Mega 2560 Pro MCU Module for building permanent projects
Select PCB Only, PCB With Kit, Fully Assembled, Assembled with MCU
Compatible with 3.3V and 5V MCUs
Flash memory is used to add 512M-bit non-volatile memory to Teensy 4.1
Includes 8MB PSRAM & 16MB / 128MB / 256MB Flash or 16MB PSRAM
Select Configuration
Allows MicroSD cards to be written and read
Versatile timer/oscillator that can be used for many applications up to 2.1MHz.
Uses capacitance to determine the amount of moisture in soil.
Stick module combines 8 WS2812 addressable LEDs
Flash memory for additional non-volatile storage on Teensy 4.1 and Audio Adapters
Small pushbutton switches with snap action feel and audible click
Add 16-bit 44.1kHz sample rate (CD quality) audio to Teensy 4.x projects.
Select No Pins, Pins or Pins and Mic
Add16-bit 44.1kHz sample rate (CD quality) audio to Teensy 3.x projects.
QSPI PSRAM adds 64 or 128M-bit additional volatile memory to Teensy 4.1
Connects Ethernet cable to Teensy 4.1
Select Kit or Assembled
Worlds fastest Arduino compatible 600MHz microcontroller
Select Pins Loose or Soldered or Lockable
600MHz Arduino compatible microcontroller
Select Pins Loose or Soldered with Ethernet or NE (No Ethernet) or Lockable
Convenient for connecting AC power to screw terminal power connections.
The 3144 sensor can detect the presence of a magnetic field and a output logic level.
Provides gesture, proximity, ambient light and RGB color sensors with I2C interface.
Microphone and adjustable audio preamplifier in a compact easy to use package
Heating / cooling controller that operates on 12VDC and controls either AC or DC loads.
Heating / cooling controller that operates on 120VAC and controls either AC or DC loads.
Detects sound and outputs amplified version of sound waveform
Heavy-duty panel mount binding posts
Simple ball activated switch that closes when the leads are pointed downward.
5mm LDR / photosensor sensor for detecting the presence or absence and relative strength of light.
Sensitive micro shock detecting sensor that outputs pulses when a shock or vibration is detected.
Extra long leads ideal for solderless breadboards.
8-channel bi-directional logic level converter.
Provides up to 8 channels of 10-bit Analog-to-Digital conversion with SPI interface.
K-Type digital converter has range of 0-1024°C
Two parallel N-Channel logic compatible MOSFETS with low Rds(on)
0-150kHz PWM generator with pushbutton controls and serial interface
Features phosphor bronze contacts and is part of our Pro Series of products.
Use with HC-SR04, HY-SRF05, US-100 to provide readout of distance
Select Board Only or Board With Component Kit
JFET high input impedance quad op amp operates from a single or split power supply.
Converts a 3.5 – 28V input down to a 1.25 – 26.5V output @ up to 2A with wired connections.
Adapts SOT223 or SOT89 packages to standard 0.1″ footprint.
Adapts 14-pin SOIC and TSSOP packages to 0.5″ DIP footprint
Adapts 16-pin SOIC and TSSOP packages to 0.5″ DIP footprint
Adapts 20-pin SOIC and TSSOP packages to 0.6″ DIP footprint
Adapts 28-pin SOIC and TSSOP packages to 0.6″ DIP footprint
Connect up to 8 I2C devices or 8 separate I2C buses.
Boosts a 2.5 – 24V input up to a 5 – 28V output @ up to 1.5A.
Mini module converts a 4.5 – 28V input down to a 0.8 – 20V output @ up to 2A.
Ultra small module converts 4.5 – 24V input down to a 0.8 – 22V output @ up to 2A.
Powerful 32-bit processor with WiFi and Bluetooth capability.
6 digital I/O, 3 support PWM and 4 support analog inputs.
Closeout Special
Combines 3-axis accelerometer and gyroscope packaged in low cost module.
High performance pressure / temp sensor with I2C & SPI interface
Analog UV light to voltage converter for measuring the intensity of UV light.
Arduino compatible board with 32-bit 84MHz ARM processor operating at 3.3V.
WiFi enabled processor in a compact package for embedding into projects.
Module can be used to expand the digital I/O of an MCU using the I2C bus.
Upgraded version of the SG90 with improved gears and torque.
Red/green/black binding posts for power supply applications
An integrated ECG/EKG device for charting the activity of the heart.