Home » You searched for 24 pin header
Showing 1–100 of 309 results
Down revision board documentation
Full color round display with wide viewing angle.
Snap to size machined round pin (Swiss style) gold plated male headers.
Adapts 28-pin SOIC and TSSOP packages to 0.6″ DIP footprint
Adapts 24-pin SOIC and TSSOP packages to 0.6″ DIP footprint
Adapts 20-pin SOIC and TSSOP packages to 0.6″ DIP footprint
Adapts 16-pin SOIC and TSSOP packages to 0.5″ DIP footprint
Uses ILI9341 display and XPT2046 touch SPI controllers
Platform for working with the powerful Teensy 4.1
Bottom mounted I/O for most PCB baseboards.
Select Configuration
Fits male or female Dupont style contacts for custom jumper cables
Solid conductor tin-plated copper wire with PVC insulation – 750ft
Translates 3.3V to 5V logic levels and buffers signals
Compact tight-fitting 2-pin connector kit
Wires pre-cut to lengths of 15cm and 5cm with tinned leads (100 pcs)
Complete set of M/F low profile quality breakaway headers for 48-pin MCUs
1×18 single row female headers.
32K-byte EEPROM is used to provide non-volatile memory storage
8K-byte EEPROM is used to provide non-volatile memory storage
512K-byte EEPROM is used to provide small non-volatile memory storage
Microchip 23LC1024 SRAM for adding delay line functionality to Teensy Audio adapters
Useful for socketing 48-pin MCUs like the Teensy 4.1
Useful for socketing 28-pin Teensy MCUs and Teensy Audio modules
256-byte EEPROM is used to provide small non-volatile memory storage
Extra tall stackable male/female header
Full color display with wide viewing angle. This is version without CS pin.
Low-power quad op amp operates from a single or split supply.
Useful for socketing Micro Pro and similar 24-pin MCU modules
Useful for socketing Nano, ESP8266 and similar 30-pin MCU modules
Snap to size machined round female headers work with round male pin header or component leads.
Cut to size machined round pin (Swiss style) gold plated male headers.
Allows ICs and other leaded devices to be inserted and removed from a circuit easily and without damage.
Allow ICs and other leaded devices to be inserted and removed from a circuit easily and without damage.
Solid nickel plated brass body supports up to 24A
Compact tight-fitting connector ideal for RC toys and similar applications
Adapter accepts a Micro-B style USB cable and converts to male header
These are 1×40 single row male headers in Red, White, Blue, Yellow, Green and Black that can be cut to the length required.
These are yellow 1×40 single row male headers that can be cut to the length required.
These are green 1×40 single row male headers that can be cut to the length required.
These are blue 1×40 single row male headers that can be cut to the length required.
These are red 1×40 single row male headers that can be cut to the length required.
These are white 1×40 single row male headers that can be cut to the length required.
1×40 single row female headers.
Used to make custom solderless breadboard and header jumper cables.
nRF24L01 with power amplifier and antenna for extended range.
Handles up to 20V @ 24A with low Rds(on) of 50mΩ and is logic compatible.
Breakout adapter includes a built-in 3.3V regulator and easy header hookup.
RF Wireless Module has a range up to 100 meters and up to 2Mbps data rate.
Tin plated headers can be snapped to the length required.
Spring loaded pincher grips for making temporary test connections.
1×20 single row female headers.
1×16 single row female headers.
1×7 single row female headers.
Tin plated headers that can be snapped to the length required.
1×10 single row female headers.
1×8 single row female headers.
Adapts 20-pin SMD IC packages including SOIC, SOP, SSOP, TSSOP to DIP-20 footprint.
Adapts 28-pin SMD IC packages including SOIC, SOP, SSOP and TSSOP to DIP-28 footprint.
Adapts 24-pin SMD IC packages including SOIC, SOP, SSOP, TSSOP to DIP-24 footprint.
Adapts 14-pin SMD IC packages including narrow SOIC, SOP, SSOP or TSSOP to DIP-14 footprint.
Adapts between 2.54, 2.0 and 1.27mm connector pitches.
Platform for building a project based on the Teensy 4.1
Acrylic enclosure for the Project System for Teensy 4.1
For use with Prototyping System for Teensy 4.1 for connecting MIDI devices
Provides electrical isolation and logic level conversion
8 Common Cathode LEDs with series resistors.
Converts between 3.3V and 5V using SN74LVC4245A octal transceiver
Select Pins Loose or Pins Soldered
Converts SPI bus Up or Down using SN74LVC2T245 buffers
Adds 10 additional I/O pins to Teensy 4.0
Preconfigured with black anodized aluminum heatsink and pins
For compact Teensy 4.0 and 4.1 audio projects
For connecting to Teensy 4.1 USB Host port
For use with Prototyping and Project System for Teensy 4.1 baseboards.
Medium duty screw terminals fits standard 0.2″ hole spacing.
Makes Mini MP3 / WAV Player Modules easy to use
Model MP3-TF-16P / FN-M16P
For Prototyping System for Teensy 4.1
White, IP30 Non-Waterproof, 5V Operation
Bottom extended reach Ethernet header for AgOpenGPS Baseboards
Select Kit or Assembled
Small pushbutton switches with snap action feel and audible click
For use with Prototyping System for Teensy 4.1
Adapts SOT223 or SOT89 packages to standard 0.1″ footprint.
Low cost 16-bit stereo audio